Dual VNH2SP30 Motor Driver Carrier MD03A
If you are looking to drive two high-power motors through one compact unit, these dual VNH2SP30 motor driver carriers are perfect for you. With these boards, it’s easy to get a medium-sized, differential drive robot running in no time.
Note: The VNH2SP30 motor drivers used by this board have been discontinued by ST. We strongly recommend our dual carrier for the newer and better VNH5019, which can be used as an Arduino shield or standalone board, as an alternative.
Alternatives available with variations in these parameter(s): motor driver Select variant…
| Description | Specs (11) | Pictures (4) | Resources (5) | FAQs (0) | On the blog (1) | Distributors (0) |
|---|
Dimensions
| Size: | 1.86″ × 1.86″ |
|---|
General specifications
| Motor driver: | VNH2SP30 |
|---|---|
| Motor channels: | 2 |
| Minimum operating voltage: | 5.5 V |
| Maximum operating voltage: | 16 V |
| Continuous output current per channel: | 14 A |
| Peak output current per channel: | 30 A |
| Continuous paralleled output current: | 25 A |
| Current sense: | 0.13 V/A |
| Maximum PWM frequency: | 20 kHz |
| Reverse voltage protection?: | Y1 |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
