Mechanical Components » Motors and Gearboxes » Tamiya Motors and Gearboxes »
Tamiya 70110 4-Speed Crank-Axle Gearbox Kit
This gearbox has four possible gear ratios, including the highest gear ratio of Tamiya’s gearbox series, 5402:1. The other options are 126:1, 441:1, and 1543:1. This gearbox also features a worm gear, which locks the output shaft when the motor is not turning.
Alternatives available with variations in these parameter(s): color Select variant…
Compare all products in Tamiya Motors and Gearboxes or Tamiya Gearboxes with 3mm Hexagonal Shafts.
| Description | Specs (7) | Pictures (8) | Resources (3) | FAQs (6) | On the blog (0) | Distributors (6) |
|---|
General specifications
| Typical operating voltage: | 3 V |
|---|---|
| Gear ratio options: | 126, 441, 1543, 5402 :1 |
| No-load motor shaft speed @ 3V: | 12300 rpm1 |
| No-load current @ 3V: | 150 mA2 |
| Stall current @ 3V: | 2100 mA |
| Motor shaft stall torque @ 3V: | 0.5 oz·in3 |
| Color: | gray |
Notes:
- 1
- A theoretical speed of the gearbox output shaft can be computed by dividing this speed by the gear ratio.
- 2
- This is the no-load current of the motor when disconnected from the gears in the gearbox; the no-load current of the entire gearbox with the motor connected will be slightly higher and will vary depending on the gear ratio.
- 3
- A theoretical torque of the gearbox output shaft can be computed by multiplying this torque by the gear ratio.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
