Pololu Metal Gearmotors » Micro Metal Gearmotors » 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
1000:1 Micro Metal Gearmotor HPCB 12V with 12 CPR Encoder, Side Connector
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft. Cables sold separately.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| HPCB 12V: high-power 12V with carbon brushes | 986.41:1 with brass plates | 12 CPR incremental quadrature with side connector | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 12 V | 35 RPM, 80 mA | 10 kg⋅cm (138 oz⋅in), 0.75 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors.
| Description | Specs (19) | Pictures (26) | Resources (3) | FAQs (2) | On the blog (0) | Distributors (23) |
|---|
Dimensions
| Size: | 10 × 12 × 35.5 mm1 |
|---|---|
| Weight: | 12 g |
| Shaft diameter: | 3 mm2 |
General specifications
| Gear ratio: | 986.41:1 |
|---|---|
| No-load speed @ 12V: | 35 rpm3 |
| No-load current @ 12V: | 0.08 A4 |
| Stall current @ 12V: | 0.75 A5 |
| Stall torque @ 12V: | 10 kg·cm5 |
| No-load speed @ 6V: | 18 rpm6 |
| Stall current @ 6V: | 0.38 A6 |
| Stall torque @ 6V: | 5.0 kg·cm6 |
| Encoder: | 12 CPR encoder with side connector |
| Long-life carbon brushes?: | Y |
| Motor type: | 0.75A stall @ 12V (HPCB 12V - carbon brush) |
Performance at maximum efficiency
| Max efficiency @ 12V: | 25 % |
|---|---|
| Speed at max efficiency: | 27 rpm |
| Torque at max efficiency: | 2.1 kg·cm |
| Current at max efficiency: | 0.19 A |
| Output power at max efficiency: | 0.59 W |
Notes:
- 1
- Output shaft adds 10 mm to the 35.5 mm length, and the encoder extends past the 10 × 12 gearbox cross section on three of the four sides. See dimension diagram for details.
- 2
- D shaft.
- 3
- Typical; ±20%.
- 4
- Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
- 5
- This is a theoretical value; stalling the gearbox output shaft could damage the gearbox.
- 6
- This motor will run at 6 V but is intended for operation at 12 V.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
