Pololu Metal Gearmotors » Micro Metal Gearmotors » 6V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
75:1 Micro Metal Gearmotor HPCB 6V with 12 CPR Encoder, Back Connector
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft. Cables sold separately.
| motor/brush type | gearbox | encoder | |
|---|---|---|---|
| HPCB 6V: high-power 6V with carbon brushes | 75.81:1 with brass plates | 12 CPR incremental quadrature with back connector | |
| voltage | no-load performance | stall extrapolation* |
|---|---|---|
| 6 V | 430 RPM, 150 mA | 1.1 kg⋅cm (15 oz⋅in), 1.5 A |
| * Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. | ||
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in 6V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors.
| Description | Specs (17) | Pictures (26) | Resources (3) | FAQs (2) | On the blog (0) | Distributors (31) |
|---|
|
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, back connector (cable not included). |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, side connector (cable not included). |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
|---|
 |
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
|---|
 |
Rear view of Micro Metal Gearmotor with 12 CPR encoder, back connector. |
|---|
 |
Rear view of Micro Metal Gearmotor with 12 CPR encoder, side connector. |
|---|
 |
Pin 1 (M1) on the Micro Metal Gearmotors with encoders. |
|---|
 |
Encoder A and B outputs of a magnetic encoder on a high-power (HP) 6V Micro Metal Gearmotor running at 6 V. |
|---|
 |
Schematic diagram of the integrated Micro Metal Gearmotor encoder. |
|---|
 |
Micro Metal Gearmotor next to a US quarter dollar for size reference. |
|---|
 |
Micro Metal Gearmotor size comparison of 1000:1 (bottom) vs other gear ratios (top). |
|---|
 |
Micro Metal Gearmotor (standard version without encoder or extended motor shaft). |
|---|
 |
Micro Metal Gearmotor with extended motor shaft. |
|---|
 |
Micro Metal Gearmotor HPCB long-life carbon brushes (left) next to Micro Metal Gearmotor HP precious metal brushes (right). |
|---|
 |
Pololu Wheel 32×7mm on a Micro Metal Gearmotor. |
|---|
 |
12mm Hex Wheel Adapter for 3mm Shaft on a Micro Metal Gearmotor. |
|---|
 |
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
|---|
 |
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
|---|
 |
37D mm Metal Gearmotor next to a Micro Metal Gearmotor for size comparison. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
