Brushed DC Motor Controllers » Motoron Motor Controllers » Motoron M3S550 Triple Motor Controller Shield for Arduino »
Motoron M3S550 Triple Motor Controller Shield for Arduino (Connectors Soldered)
The Motoron M3S550 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for projects that need to control even more motors. The M3S550 supports motor supply voltages from 1.8 V to 22 V and can deliver continuous output currents up to 1.7 A per motor. This version ships with soldered stackable headers and terminal blocks.
Compare all products in Motoron M3S550 Triple Motor Controller Shield for Arduino.
| Description | Specs (15) | Pictures (9) | Resources (5) | FAQs (0) | On the blog (1) |
|---|
|
Motoron M3S550 Triple Motor Controller Shield for Arduino (Connectors Soldered). |
|---|
 |
Motoron M3S550 Triple Motor Controller Shield for Arduino (Connectors Soldered). |
|---|
 |
Motoron M3S550 shield being controlled by an Arduino Uno. |
|---|
 |
Three Motoron M3S550 shields being controlled by an Arduino Uno. |
|---|
 |
Three Motoron M3S256 or M3S550 shields attached to an Arduino Uno, showing the spacing of the 3.5 mm terminal blocks. |
|---|
 |
Motoron M3S550 Triple Motor Controller Shield for Arduino (Connectors Soldered), top view. |
|---|
 |
Motoron M3S550 Triple Motor Controller Shield Kit for Arduino, bottom view with dimensions. |
|---|
 |
Using the Motoron M3S256 or M3S550 Triple Motor Controller Shield with an Arduino. |
|---|
 |
Motoron M3S256 or M3S550 Triple Motor Controller Shield pinout. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
