Motion Control Modules » Stepper Motor Drivers » DRV8434x Stepper Motor Driver Carriers »
DRV8434 Stepper Motor Driver Carrier (Header Pins Soldered)
This version of our DRV8434 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8434 Stepper Motor Driver Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): current limit control header pins soldered? Select variant…
Compare all products in DRV8434x Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
| Description | Specs (14) | Pictures (6) | Resources (7) | FAQs (4) | On the blog (0) |
|---|
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.4 g |
General specifications
| Minimum operating voltage: | 4.5 V1 |
|---|---|
| Maximum operating voltage: | 48 V2 |
| Continuous current per phase: | 1.2 A3 |
| Maximum current per phase: | 2 A4 |
| Minimum logic voltage: | 1.8 V5 |
| Maximum logic voltage: | 5.5 V6 |
| Microstep resolutions: | full with 100% current, full with 70% current, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 |
| Current limit control: | potentiometer |
| Reverse voltage protection?: | N |
| Header pins soldered?: | Y |
Identifying markings
| PCB dev codes: | md43a |
|---|---|
| Other PCB markings: | 0J13721 |
Notes:
- 1
- Inputs below 6 V reduce the maximum settable current limit. With 4.5 V in the maximum settable limit is 1.75 A.
- 2
- Not intended for use with 48V batteries, which can be well above nominal when fully charged.
- 3
- Without a heat sink or forced air flow.
- 4
- With sufficient additional cooling.
- 5
- Logic high threshold varies for two-state, tri-state, and quad-state pins. See datasheet for details.
- 6
- Absolute maximum voltage on any input is 5.75 V.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
