Electronics » Motion Control Modules » Tic Stepper Motor Controllers »
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with soldered header pins and terminal blocks. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…
| Description | Specs (15) | Pictures (9) | Resources (16) | FAQs (1) | On the blog (7) |
|---|
-
Moving sculpture Kinetic Little Rain
- 1 June 2023This hypnotic video from customer Alain Haerri shows Kinetic Little Rain, a moving sculpture that was inspired by the sculpture Kinetic Rain in...
-
Firmware update for Tic Stepper Motor Controllers, with new features including limit switches and homing
- 5 February 2019Connecting a limit switch to the Tic (SCL, SDA, TX, and RX pins). To go along with last week’s release of the Tic T249, we have also released a new...
-
New Tic T500 revision to address problem with missed steps
- 18 January 2019One of the fun things you learn as an engineer is that physically laying out a circuit requires a lot more than simply confirming it matches the...
-
PyTic - Python interface for Pololu Tic Stepper Motor Controllers
- 7 August 2018Customer Daniel Castelli of the Allen Institute has released a Python package for interfacing with our Tic Stepper Motor Controllers. Currently, he...
-
Video: Getting Started with the Tic Stepper Motor Controllers
- 21 March 2018As I showed in my last post a few weeks ago, our Tic stepper motor controllers offer six different control interfaces so you can add stepper motors...
-
New product: Tic T500 USB Multi-Interface Stepper Motor Controller
- 14 March 2018Our Tic stepper motor controllers are pretty awesome, and the new Tic T500 we released today should make stepper motors even more accessible for...
-
Video: Introducing the Tic Stepper Motor Controllers
- 28 February 2018Our Tic Stepper Motor Controllers make basic control of stepper motors easy. This quick video shows you all the control interfaces you can use with...
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
