Electronics » Motion Control Modules » Tic Stepper Motor Controllers »
Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8825 driver and ships with soldered header pins and terminal blocks. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…
| Description | Specs (15) | Pictures (8) | Resources (16) | FAQs (1) | On the blog (6) |
|---|
-
Ham radio antenna rotor control using a Tic Stepper Motor Controller
- 8 July 2019Pablo Lewin wanted a way to adjust the antenna for his Ham radio remotely, but was told his antenna controller was too old to upgrade for remote...
-
Firmware update for Tic Stepper Motor Controllers, with new features including limit switches and homing
- 5 February 2019Connecting a limit switch to the Tic (SCL, SDA, TX, and RX pins). To go along with last week’s release of the Tic T249, we have also released a new...
-
PyTic - Python interface for Pololu Tic Stepper Motor Controllers
- 7 August 2018Customer Daniel Castelli of the Allen Institute has released a Python package for interfacing with our Tic Stepper Motor Controllers. Currently, he...
-
Video: Getting Started with the Tic Stepper Motor Controllers
- 21 March 2018As I showed in my last post a few weeks ago, our Tic stepper motor controllers offer six different control interfaces so you can add stepper motors...
-
Video: Introducing the Tic Stepper Motor Controllers
- 28 February 2018Our Tic Stepper Motor Controllers make basic control of stepper motors easy. This quick video shows you all the control interfaces you can use with...
-
Introducing the Tic T825 USB Multi-Interface Stepper Motor Controller
- 20 July 2017I am excited to announce our new product, the Tic T825 USB Multi-Interface Stepper Motor Controller. The Tic makes basic speed or position control...
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
