Sensors » Encoders » Encoders for Micro Metal Gearmotors »
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and Hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. These encoders have their pins arranged as through-holes on a 2mm pitch, and wires or 2mm-pitch connectors must be soldered in to use them. This module is compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions.
Alternatives available with variations in these parameter(s): connector Select variant…
Compare all products in Encoders for Micro Metal Gearmotors.
| Description | Specs (7) | Pictures (13) | Resources (5) | FAQs (0) | On the blog (5) |
|---|
|
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible). |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible), motor-side view of PCB with dimensions |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors (HPCB compatible), magnet-side view of PCB with labeled pinout. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors (HPCB compatible), motor-side view of PCB. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors (HPCB compatible). |
|---|
 |
Magnetic Encoder on a Micro Metal Gearmotor with Extended Motor Shaft, assembled with ribbon cable wires. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled with 2mm-pitch male header pins installed over the motor. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled with 2mm-pitch male header pins installed over the magnetic disc. |
|---|
 |
Encoder A and B outputs of a magnetic encoder on a high-power (HP) 6V Micro Metal Gearmotor running at 6 V. |
|---|
 |
Magnetic Encoder Kit for Micro Metal Gearmotors schematic diagram. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
