Motion Control Modules » Stepper Motor Drivers » MP6500 Stepper Motor Driver Carriers »
MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control (Header Pins Soldered)
This version of our MP6500 Stepper Motor Driver Carrier with Potentiometer Current Control ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control product page for more information about the driver.
Alternatives available with variations in these parameter(s): current limit control header pins soldered? Select variant…
Compare all products in MP6500 Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
| Description | Specs (14) | Pictures (8) | Resources (9) | FAQs (4) | On the blog (1) | Distributors (40) |
|---|
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.5 g |
General specifications
| Minimum operating voltage: | 4.5 V |
|---|---|
| Maximum operating voltage: | 35 V |
| Continuous current per phase: | 1.5 A1 |
| Maximum current per phase: | 2.5 A2 |
| Minimum logic voltage: | 2.1 V3 |
| Maximum logic voltage: | 6 V4 |
| Microstep resolutions: | full, 1/2, 1/4, and 1/8 |
| Current limit control: | potentiometer |
| Reverse voltage protection?: | N |
| Header pins soldered?: | Y |
Identifying markings
| PCB dev codes: | md33a, md33b |
|---|---|
| Other PCB markings: | 0J10855, 0J11019 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
