DRV8880 Stepper Motor Driver Carrier (Header Pins Soldered)
This version of our DRV8880 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8880 Low-Voltage Stepper Motor Driver Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): header pins soldered? Select variant…
| Description | Specs (13) | Pictures (8) | Resources (8) | FAQs (4) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 0.6″ × 0.8″ |
|---|---|
| Weight: | 2.5 g |
General specifications
| Minimum operating voltage: | 6.5 V |
|---|---|
| Maximum operating voltage: | 45 V |
| Continuous current per phase: | 1 A1 |
| Maximum current per phase: | 1.6 A2 |
| Minimum logic voltage: | 1.8 V3 |
| Maximum logic voltage: | 5.3 V3 |
| Microstep resolutions: | full, non-circular 1/2, 1/2, 1/4, 1/8, and 1/16 |
| Reverse voltage protection?: | N |
| Header pins soldered?: | Y |
Identifying markings
| PCB dev codes: | md32a |
|---|---|
| Other PCB markings: | 0J9581 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
