Voltage Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S9V11x Step-Up/Step-Down Voltage Regulators »
3.3V Step-Up/Step-Down Voltage Regulator S9V11F3S5
| Output voltage | Typical max current* | Input voltage range* | Low-voltage cutoff | Size |
|---|---|---|---|---|
| 3.3 V (5 V selectable) | 1.5 A | 2 V – 16 V | 0.5″ × 0.60″ × 0.17″ |
*For input voltages close to the output. Actual achievable maximum continuous current is a function of input and output voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.
Compare all products in S9V11x Step-Up/Step-Down Voltage Regulators.
| Description | Specs (10) | Pictures (14) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (14) |
|---|
Dimensions
| Size: | 0.5″ × 0.6″ × 0.17″1 |
|---|---|
| Weight: | 0.7 g1 |
General specifications
| Minimum operating voltage: | 2 V2 |
|---|---|
| Maximum operating voltage: | 16 V |
| Maximum output current: | 1.5 A3 |
| Output voltage: | 3.3 V4 |
| Reverse voltage protection?: | N |
| Maximum quiescent current: | 1 mA5 |
Identifying markings
| PCB dev codes: | reg20b |
|---|---|
| Other PCB markings: | 0J10534 |
Notes:
- 1
- Without included optional headers.
- 2
- Note: the minimum startup voltage is 3V, but the regulator can operate down to 2V after startup.
- 3
- Under typical conditions, where the input voltage is close to the output voltage. Maximum output current can be higher when stepping down and lower when stepping up.
- 4
- Output can be changed to 5 V by driving the SEL pin over 1.1 V.
- 5
- With no load. Actual quiescent current depends on input voltage; it is typically under 300 µA when the input voltage is close to the output voltage.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
