Voltage Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S9V11x Step-Up/Step-Down Voltage Regulators »
2.5-9V Fine-Adjust Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11MACMA
| Output voltage | Typical max current* | Input voltage range* | Low-voltage cutoff | Size |
|---|---|---|---|---|
| 2.5 V – 9 V (fine-adjust) | 1.5 A | 2 V – 16 V | fine-adjust | 0.5″ × 0.60″ × 0.25″ |
*For input voltages close to the output. Actual achievable maximum continuous current is a function of input and output voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.
Compare all products in S9V11x Step-Up/Step-Down Voltage Regulators.
| Description | Specs (12) | Pictures (18) | Resources (3) | FAQs (0) | On the blog (1) |
|---|
File downloads
-
Dimension diagram for the Step-Up/Step-Down Voltage Regulator S9V11x (142k pdf)
Note: this dimension diagram does not apply to the smaller S9V11F5.
-
3D model of the Step-Up/Step-Down Voltage Regulator S9V11x (4MB step)
Note: this model does not apply to the smaller S9V11F5.
-
Drill guide for the Step-Up/Step-Down Voltage Regulator S9V11x (23k dxf)
This DXF drawing shows the locations of all of the board’s holes. Note that this does not apply to the smaller S9V11F5.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
