Electronics » Sensors » Accelerometers, Gyros, & Compasses »
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier)
The AltIMU-10 v6 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DSO gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v6, and adds an LPS22DF digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.
Compare all products in Accelerometers, Gyros, & Compasses or MEMS Sensors.
| Description | Specs (10) | Pictures (7) | Resources (17) | FAQs (0) | On the blog (0) |
|---|
Dimensions
| Size: | 1.0″ × 0.5″ × 0.1″1 |
|---|---|
| Weight: | 0.8 g1 |
General specifications
| Interface: | I²C |
|---|---|
| Minimum operating voltage: | 2.5 V |
| Maximum operating voltage: | 5.5 V |
| Axes: | pitch (x), roll (y), and yaw (z) |
| Measurement range: |
±125, ±250, ±500, ±1000, or ±2000°/s (gyro) ±2, ±4, ±8, or ±16 g (accelerometer) ±4, ±8, ±12, or ±16 gauss (magnetometer) 26 kPa to 126 kPa (barometer)2 |
| Supply current: | 5 mA |
Identifying markings
| PCB dev codes: | imu08a |
|---|---|
| Other PCB markings: | 0J14124 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
