Screw Terminal Block: 9-Pin, 0.1″ Pitch, Side Entry

Assortment of Screw Terminal Blocks: 0.1″ Pitch, Side Entry.

0.1″ terminal blocks and a male header strip in an Adafruit Perma-Proto prototyping PCB.

Screw terminal block: 0.1″ pitch, side entry.

Using a 4-pin 0.1″ screw terminal block for the motor and motor power connections on the #2136 DRV8801 dual motor driver carrier.

Using a 4-pin 0.1″ screw terminal block for the motor and motor power connections on the #2136 DRV8801 dual motor driver carrier.

0.1″ screw terminal block being used with a VNH5019 motor driver carrier in place of the included 0.1″-pitch male header.

0.1″ screw terminal block being used with a VNH5019 motor driver carrier in place of the included 0.1″-pitch male header.

If components on the top side do not allow enough clearance, the 0.1″ screw terminal blocks can sometimes be used on the bottom side of the PCB.

If components on the top side do not allow enough clearance, the 0.1″ screw terminal blocks can sometimes be used on the bottom side of the PCB.

Side-by-side comparison of our different terminal blocks with a 0.1″ male header strip for size reference. From left to right: 0.1″ screwless, 0.1″ screw, 3.5 mm screw, and 5 mm screw.