Connectors » Terminal Blocks » 0.1″ (2.54 mm) Screw Terminal Blocks »
Screw Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (4-Pack)
These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has two terminals for the stripped ends of 26 – 18 AWG wires. They are rated for 150 V, 6 A and ship in packs of four.
Alternatives available with variations in these parameter(s): pins Select variant…
Compare all products in 0.1″ (2.54 mm) Screw Terminal Blocks.
| Description | Specs (9) | Pictures (10) | Resources (1) | FAQs (0) | On the blog (1) |
|---|
Dimensions
| Pins: | 2 |
|---|---|
| Spacing: | 0.1 in |
General specifications
| Wire gauge: | 26-18 AWG |
|---|---|
| Current rating: | 6 A |
| Voltage rating: | 150 V |
| Contact resistance: | 20 mΩ |
| Wire strip length: | 4.5 mm |
| Terminal type: | screw |
| Orientation: | side entry |
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
