Sensors » Proximity Sensors and Range Finders » Carriers for ST Time-of-Flight (ToF) Distance Sensors »
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results independent of the target’s color and surface. Distance measurements can be read through a digital I²C interface. The board has a 2.8 V linear regulator and integrated level-shifters that allow it to work over an input voltage range of 2.6 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Compare all products in Carriers for ST Time-of-Flight (ToF) Distance Sensors.
| Description | Specs (10) | Pictures (10) | Resources (12) | FAQs (0) | On the blog (6) | Distributors (66) |
|---|
File downloads
-
VL53L0X datasheet (1MB pdf)
Datasheet for the ST VL53L0X time-of-flight ranging sensor.
-
UM2309: VL53L0X API user manual (1MB pdf)
-
Schematic diagram of the VL53L0X/VL53L1X/VL53L3CX/VL53L4CD Time-of-Flight Distance Sensor Carrier (96k pdf)
-
Dimension diagram of the VL53L0X/VL53L1X/VL53L3CX/VL53L4CD Time-of-Flight Distance Sensor Carrier with Voltage Regulator (295k pdf)
-
3D model of the VL53L0X/VL53L1X/VL53L3CX/VL53L4CD Time-of-Flight Distance Sensor Carrier with Voltage Regulator (3MB step)
-
Drill guide for the VL53L0X/VL53L1X/VL53L3CX/VL53L4CD Time-of-Flight Distance Sensor Carrier with Voltage Regulator (21k dxf)
This DXF drawing shows the locations of all of the board’s holes.
-
AN4846: Using multiple VL53L0X in a single design (196k pdf)
This application note from ST describes how to use multiple VL53L0X sensors on a single I²C bus.
-
UM10204 I²C-bus specification and user manual (1MB pdf)
The official specification for the I²C-bus, which is maintained by NXP.
Recommended links
-
VL53L0X library for Arduino
An Arduino library for interfacing with the VL53L0X time-of-flight distance sensor.
-
VL53L0X documentation
ST’s product page for the VL53L0X, with links to application notes and other resources.
-
VL53L0X API (STSW-IMG005)
ST’s API (application programming interface) for the VL53L0X.
-
VL53L0X API port for Raspberry Pi
A port of ST’s VL53L0X API for the Raspberry Pi by Mathieu Cassard.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
