Mechanical Components » Stepper Motors »

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase

This NEMA 17-size pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1.9 kg-cm (26 oz-in), and each phase draws 1 A at 5.4 V. This stepper motor’s flat profile (25.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.

	Description		Specs (13)		Pictures (6)		Resources (1)		FAQs (2)		On the blog (1)

Sanyo pancake stepper motor: bipolar, 200 steps/rev, 42×18.6mm, 5.4V, 1000mA (SS2422-5041).

Dimensions (in mm) of the Sanyo 42mm pancake stepper motors.

Bipolar stepper motor wires are terminated with bare leads.

Sanyo bipolar stepper motor wiring diagram.

Bottom view of the 42×18.6mm Sanyo pancake stepper motor.

Sanyo stepper motors; from left to right: 14mm single shaft, 42×18.6mm, 50×11mm, 14mm double shaft

Related products

	Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
	Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR
	Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase
	Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR
	Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase
	Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×11mm, 4.5V, 1 A/Phase
	Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
	Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack)
	Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
	AMIS-30543 Stepper Motor Driver Carrier
	DRV8825 Stepper Motor Driver Carrier, High Current
	DRV8834 Low-Voltage Stepper Motor Driver Carrier
	A4988 Stepper Motor Driver Carrier, Black Edition
	A4988 Stepper Motor Driver Carrier
	Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
	Male Crimp Pins for 0.1" Housings 100-Pack
	0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack