Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR

Pololu item #: 2278
Brand: Sanyo Denki
RoHS 3 status: supplier unspecified


Price break Unit price (US$)
1 209.95


This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000 counts per revolution of the output shaft when counting both edges of both channels. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 3.5 V, allowing for a holding torque of 0.85 kg-cm (12 oz-in).

 Description Specs (14) Pictures (11) Resources (2) FAQs (2) On the blog (1) Distributors (25) 

Dimensions

Size: 42 mm square × 24.5 mm
(NEMA 17)1
NEMA size: 17
Weight: 105 g
Shaft diameter: 5 mm

General specifications

Current rating: 1000 mA2
Voltage rating: 3.5 V
Holding torque: 11.8 oz·in
Steps per revolution: 200
Resistance: 3.5 Ohm2
Inductance per phase: 1.2 mH
Number of leads: 4
Lead length: 30 cm3
Encoders?: Y
Encoder resolution: 4000 CPR4

Notes:

1
Not including the shaft.
2
Per coil.
3
This applies to the stepper motor leads only. The included removable encoder cable is 15 cm (6″) long.
4
Relative to the output shaft, counting both edges (rising and falling) of both channels (A and B).

Related Products

Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×11mm, 4.5V, 1 A/Phase
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
AMIS-30543 Stepper Motor Driver Carrier
DRV8825 Stepper Motor Driver Carrier, High Current
DRV8834 Low-Voltage Stepper Motor Driver Carrier
A4988 Stepper Motor Driver Carrier, Black Edition
A4988 Stepper Motor Driver Carrier
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG
Male Crimp Pins for 0.1" Housings 100-Pack
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack

Related Categories

Stepper Motors
Tic Stepper Motor Controllers
Stepper Motor Drivers
Robot Controllers
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors