Electronics » Motion Control Modules » Brushed DC Motor Drivers »
DRV8801 Single Brushed DC Motor Driver Carrier
This tiny breakout board for TI’s DRV8801 provides a modern alternative to classic motor drivers such as the L293D, SN754410, and L298N. It can deliver a continuous 1 A (2.8 A peak) to a single motor and offers a wide operating voltage range of 8 V to 36 V. The DRV8801 features a simple two-pin speed/direction interface, current-sense feedback, and built-in protection against under-voltage, over-current, and over-temperature.
| Description | Specs (12) | Pictures (8) | Resources (6) | FAQs (0) | On the blog (1) |
|---|
 |
DRV8801 single brushed DC motor driver carrier with included hardware. |
|---|
 |
DRV8801 single brushed DC motor driver carrier, labeled top view. |
|---|
 |
DRV8801 single brushed DC motor driver carrier with dimensions. |
|---|
 |
DRV8801 single brushed DC motor driver carriers inserted into a solderless breadboard. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a DRV8801 single brushed DC motor driver carrier. |
|---|
 |
Schematic diagram for the DRV8801 single brushed DC motor driver carrier. |
|---|
 |
Using a 4-pin 0.1″ screw terminal block for the motor and motor power connections on the #2136 DRV8801 dual motor driver carrier. |
|---|
 |
Using a 4-pin 0.1″ screw terminal block for the motor and motor power connections on the #2136 DRV8801 dual motor driver carrier. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
