Pololu 12V Step-Up/Step-Down Voltage Regulator S10V2F12
This switching regulator uses the SEPIC topology to produce 12 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 12 V. The compact (0.4″ × 0.575″) module can supply over 200 mA in typical applications.
Alternatives available with variations in these parameter(s): output voltage Select variant…
| Description | Specs (10) | Pictures (7) | Resources (3) | FAQs (0) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 0.4″ × 0.575″ × 0.1″1 |
|---|---|
| Weight: | 0.6 g1 |
General specifications
| Minimum operating voltage: | 2.5 V |
|---|---|
| Maximum operating voltage: | 18 V |
| Maximum output current: | 200 mA2 |
| Output voltage: | 12 V |
| Reverse voltage protection?: | N |
| Maximum quiescent current: | 2 mA3 |
Identifying markings
| PCB dev codes: | reg11a |
|---|---|
| Other PCB markings: | 0J7068 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
