Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 75:1

Pololu item #: 1567
Brand: DAGU
Status: Discontinued at Pololu 
RoHS 3 compliant

This product has been discontinued.

This rugged, 4-wheel-drive chassis from Dagu Electronics has independent suspension for each of its spiked 120mm-diameter wheels, allowing exceptional traction over uneven terrain, and its body is made from 2mm-thick anodized aluminum with a 10mm-pitch grid of 4mm holes, making it easy to mount electronics and accessories to the chassis. Assembly of the chassis is a simple three-step process that takes just minutes. This model is black with metallic-red hubs and 75:1 steel gearboxes on the motors.

Alternatives available with variations in these parameter(s): color gear ratio Select variant…

 Description Specs (2) Pictures (14) Resources (1) FAQs (0) On the blog (2) 

File downloads

  • Modifying the Wild Thumper to use motors with encoders (3MB pdf)

    Customer Richard Nguyen has documented his work modifying the Wild Thumper chassis to use 25D motors with encoders in place of the chassis’s included motors.

    Note: This is not an easy modification, and the chassis can be damaged if it is not done properly, so we generally recommend against it, and we can only provide very limited support for those who want to attempt it. The manufacturer did not intend for the chassis to be modified in this way, and we do not know how well such a modification will work out.

Related Products

Dagu Wild Thumper 4WD All-Terrain Chassis, Silver, 34:1
Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 34:1
Dagu Wild Thumper 6WD All-Terrain Chassis, Black, 34:1
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
High-Power Simple Motor Controller G2 18v15
High-Power Simple Motor Controller G2 24v19
RoboClaw 2x15A Motor Controller (V6B)
Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
Pololu Dual VNH5019 Motor Driver Shield for Arduino
75:1 Metal Gearmotor 25Dx54L mm HP 6V
34:1 Metal Gearmotor 25Dx52L mm HP 6V
Dagu Wild Thumper Wheel 120x60mm Pair with 4mm Shaft Adapters - Metallic Red
Dagu Wild Thumper Wheel 120x60mm Pair with 4mm Shaft Adapters - Chrome
T Connector Male-Female Pair
Rocker Switch: 3-Pin, SPDT, 10A
Maxbotix LV-MaxSonar-EZ1 Sonar Range Finder MB1010
Pololu Carrier with Sharp/Socle GP2Y0A60SZLF Analog Distance Sensor 10-150cm, 5V

Related Categories

Wild Thumper All-Terrain Chassis
Chassis
Sensors
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Simple Motor Controllers
RoboClaw Motor Controllers
RC Servos
4mm Shaft Gearmotors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors