6x1 F-F 12" Cable for ShiftBrites and ShiftBars

Pololu item #: 1239

This product has been discontinued.

These 12" (30 cm), six-conductor cables can be used to chain together ShiftBrite or ShiftBar modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is composed of stranded 26 AWG wires and has female 0.1" 6×1 connectors on both ends.

Alternatives available with variations in these parameter(s): length Select variant…

 Description Specs (4) Pictures (2) Resources (0) FAQs (0) On the blog (0) Distributors (0) 

This cable can serve as a generic, 6-conductor ribbon cable with 6×1 0.1" female connectors on both ends, but it is designed for chaining ShiftBrites or ShiftBars together to achieve displays such as those shown in the video at the bottom of this page. The cable wires are 26 AWG with stranded conductors.

The cables are available in two lengths:

Three ShiftBrites chained together.

People often buy this product together with:

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Products

6x1 F-F 6" Cable for ShiftBrites and ShiftBars
ShiftBrite V2.0
ShiftBar
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack
Wires with Pre-Crimped Terminals 50-Piece 10-Color Assortment F-F 6"
Wires with Pre-Crimped Terminals 50-Piece 10-Color Assortment F-F 12"

Related Categories

Cables and Wire
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
LEDs
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors