200:1 Plastic Gearmotor, 90° Output

Overview

Inside the gearbox of the 200:1 plastic gearmotor with 90 degree output.

This 200:1 plastic gearmotor (gearbox with brushed DC motor) is a great low-cost alternative to modified hobby servos or Tamiya gearboxes. The low-current motor is a perfect match for our qik 2s9v1 dual serial motor controller, Baby Orangutan robot controller, or DRV8833 dual motor driver carrier, and the compact size makes this unit an attractive choice for small robot designs. The recommended operating voltage range for this motor is 3 V to 12 V.

This is a higher-torque, lower-speed version of the 120:1 plastic gearmotor 90-degree output. At 6 V, the gearbox and motor provide approximately 100 oz-in of torque and 51 RPM. The free-running current is 70 mA, and the stall current is 800 mA. The gearbox is protected by a built-in safety clutch that will typically slip before gear teeth can shear.

This gearmotor comes pre-assembled, with the gears fully enclosed, and the output shaft is 6 mm long and 7 mm in diameter with two sides flattened. The output shaft is at a 90° angle from the axis of the motor shaft; we also sell a similar gearmotor with an offset output shaft.

There are two built-in mounting holes that work with our stamped aluminum L-bracket and extended stamped aluminum L-bracket, as shown in the pictures below:

Plastic gearmotor with 90-degree output (item #1120 or #1121) mounted with Pololu stamped aluminum L-bracket.

Plastic gearmotor with 90-degree output (item #1120 or #1121) mounted with Pololu extended stamped aluminum L-bracket.

A custom-molded GMPW plastic wheel for this gearmotor is available in a variety of colors.

Details for item #1120

Exact gear ratio: ``(32×37×37×24) / (8×9×9×8) ~~ bb(202.81)``

This 200:1 gearbox with brushed DC motor has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost. It has a recommended operating voltage range of 3 V to 12 V

Key specifications:

voltage	no-load performance	stall extrapolation
6 V	51 RPM, 70 mA	7.2 kg⋅cm (100 oz⋅in), 800 mA

Dimensions

Dimensions of the 120:1 and 200:1 plastic gearmotors with 90-degree outputs. Units are mm over [inches].

This diagram is also available as a downloadable PDF (245k pdf).

People often buy this product together with:

Solarbotics GMW (GM2/3/8/9 Gear Motor Mount - ONE mount)

Pololu Stamped Aluminum L-Bracket Pair for Plastic Gearmotors