6-Pin JST SH-Style Cables

This 10 cm (4″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.

This 16 cm (6.3″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.

This 25 cm (10″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.

This 40 cm (16″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.

This 63 cm (25″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors, as well as our connector breakout boards with top-entry and side-entry connectors.

This 12 cm (4.5″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.

This 30 cm (12″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.

This 75 cm (30″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with the encoders on our Micro Metal Gearmotors, which are also available separately with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.