Tamiya 72004 Worm Gearbox Kit

Pololu item #: 73
Brand: Tamiya
RoHS 3 compliant

Price break Unit price (US$)
1 16.50


backorders allowed

The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and other applications where high torque is desired.

 Description Specs (6) Pictures (6) Resources (2) FAQs (5) On the blog (0) 

The primary feature of the Tamiya 72004 Worm Gearbox from Tamiya’s high-efficiency series is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and other applications where high torque is desired.

The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, even at very low voltages. We recommend that you use stall-detection sensors, or just watch your robot, to make sure that it doesn’t stall for more than a few seconds at a time.

This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, although it is not specifically intended to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).

For motor specs, see the Mabuchi motor RE-260 (#2295) data sheet (59k pdf). To compare all Tamiya gear box kits, see the Tamiya Gearbox Gear Ratio Comparison.

Note: The worm gearbox is a kit; assembly is required. To use the kit in robotics projects, you need to connect the motors to your own robot controller.

People often buy this product together with:

Tamiya 70145 Narrow Tire Set (2 tires) Tamiya 70145 Narrow Tire Set (2 tires)
Tamiya 70110 4-Speed Crank-Axle Gearbox Kit Tamiya 70110 4-Speed Crank-Axle Gearbox Kit
Tamiya 70103 Universal Gearbox Kit Tamiya 70103 Universal Gearbox Kit

Related Products

DRV8835 Dual Motor Driver Carrier
DRV8833 Dual Motor Driver Carrier
Tamiya 72008 4-Speed Worm Gearbox Kit
Tamiya 70098 Universal Plate Set
Tamiya 70157 Universal Plate Set (2pcs.)
Tamiya 70172 Universal Plate L (210x160mm)
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, #4-40 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, #2-56 Holes (2-Pack)

Related Categories

Tamiya Motors and Gearboxes
Tamiya Gearboxes with 4mm Round Shafts
Tamiya Wheels
Wheels Compatible with Tamiya 4mm Round Shafts
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors