Mechanical Components » Ball Casters » Pololu Ball Casters »
Pololu Ball Caster with 3/8″ Plastic Ball
This small, light ball caster uses a 3/8″ diameter plastic ball. The height of the assembled kit ranges from 0.4″ to 0.6″, depending on the combination of included spacers used.
Alternatives available with variations in these parameter(s): ball diameter ball material Select variant…
| Description | Specs (3) | Pictures (2) | Resources (2) | FAQs (1) | On the blog (6) | Distributors (58) |
|---|
-
Distributor Active Robots attends micromouse challenge at Swansea University
- 28 May 2019One of our UK distributors, Active Robots, recently had the opportunity to attend a micromouse competition at Swansea University in Wales. Students...
-
Line-following robot and mini-sumo main board from tdrobótica.co
- 30 March 2017One of our distributors in Colombia, tdrobótica.co, has developed a line-following robot kit and a mini-sumo main board kit. The first kit includes...
-
Jeremy's line following robot: Zumo Slim
- 15 May 2015I recently competed in the LVbots line following robot challenge, where I took third place with the fourth fastest robot (due to lucky placement in...
-
Claire's line following robot: Oddish
- 7 May 2015A few weeks ago the local robotics club, LVBots, hosted a line following competition here at Pololu, and like many of the engineers here, I built a...
-
Brandon's line following robot: The Chariot
- 6 May 2015For the recent LVBots line following competition, my first instinct was to try to come up with some unique alternative design for a robot that would...
-
R2-DR, Kevin's dead reckoning robot
- 26 March 2014When I first started planning a robot for the recent LVBots dead reckoning competition, it was more or less a conventional design—a flat chassis...
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
