Pololu TReX Dual Motor Controllers »
Pololu TReX Jr Dual Motor Controller DMC02
This lower-power, smaller, and lower-cost version of the TReX is the ultimate general-purpose motor controller for small motors: it has a wide operating range (5 to 24 V), delivers 2.5 A continuously per motor, provides current sensing on the two main channels, and it features the TReX triple interface that allows you to control motors from a serial line (RS-232 or TTL), radio control (RC) receiver, or analog voltage source such as a potentiometer.
| Description | Specs (15) | Pictures (7) | Resources (11) | FAQs (1) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 1.75" x 1.75" x 0.5" |
|---|---|
| Weight: | 15 g |
General specifications
| Motor driver: | MC33887 |
|---|---|
| Motor channels: | 31 |
| Control interface: |
non-inverted TTL serial (2-way); RS-232 serial (1-way), RC servo pulses, analog voltage |
| Minimum operating voltage: | 5 V |
| Maximum operating voltage: | 24 V |
| Continuous output current per channel: | 2.5 A2 |
| Peak output current per channel: | 5 A3 |
| Continuous paralleled output current: | 5 A |
| Current sense: | 0.5 V/A4 |
| Maximum PWM frequency: | 10 kHz |
| Minimum logic voltage: | 2.7 V |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y |
Notes:
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
