Sensors » Proximity Sensors and Range Finders » Pololu Digital Distance Sensors »
Pololu Distance Sensor with Pulse Width Output, 130cm Max
This small lidar-based distance sensor reports the distance of objects up to about 130 cm (50″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Note: The maximum range of 130 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
Alternatives available with variations in these parameter(s): maximum range Select variant…
Description | Specs (11) | Pictures (10) | Resources (4) | FAQs (0) | On the blog (1) |
---|
Pololu Distance Sensor with Pulse Width Output, 130cm Max. |
---|
Pololu Distance Sensor with Pulse Width Output (130cm Max or 300cm Max), bottom view. |
---|
Pololu Distance Sensor with Pulse Width Output (130cm Max or 300cm Max), bottom view with dimensions. |
---|
Pololu Distance Sensor with Pulse Width Output signal diagram. |
---|
Graph of measured vs. actual distances for several Pololu Distance Sensors with Pulse Width Output, 130cm Max. |
---|
Pololu Distance Sensor with Pulse Width Output, 130cm Max, top view. |
---|
Pololu Distance Sensor with Pulse Width Output (130cm Max or 300cm Max), bottom view. |
---|
Pololu Distance Sensor with Pulse Width Output (130cm Max or 300cm Max), top view with labeled pinout. |
---|
A camera with no IR filter shows the infrared light emitted by a Pololu Digital Distance Sensor. |
---|
Standard packaging for the Pololu Distance Sensor with Pulse Width Output, 130cm Max. |
---|