Pololu Distance Sensor with Pulse Width Output, 50cm Max

Pololu item #: 4064
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 12.95
5 11.91
25 10.96
100 10.08


backorders allowed

This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.

Note: The maximum range of 50 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.

Alternatives available with variations in these parameter(s): maximum range Select variant…

 Description Specs (11) Pictures (10) Resources (4) FAQs (0) On the blog (1) 

Pololu Distance Sensor with Pulse Width Output, 50cm Max.

Pololu Distance Sensor with Pulse Width Output, 50cm Max, bottom view.

Pololu Distance Sensor with Pulse Width Output, 50cm Max, bottom view with dimensions.

Pololu Distance Sensor with Pulse Width Output signal diagram.

Graph of measured vs. actual distances for five Pololu Distance Sensors with Pulse Width Output, 50cm Max.

Pololu Distance Sensor with Pulse Width Output, 50cm Max, top view.

Pololu Distance Sensor with Pulse Width Output, 50cm Max, bottom view.

Pololu Distance Sensor with Pulse Width Output, 50cm Max, top view with labeled pinout.

A camera with no IR filter shows the infrared light emitted by a Pololu Digital Distance Sensor.

Standard packaging for the Pololu Distance Sensor with Pulse Width Output, 50cm Max.


Related Products

Pololu Digital Distance Sensor 5cm
Pololu Digital Distance Sensor 10cm
Pololu Digital Distance Sensor 15cm
Pololu Distance Sensor with Pulse Width Output, 130cm Max
Pololu Distance Sensor with Pulse Width Output, 300cm Max
Pololu Carrier with Sharp/Socle GP2Y0D810Z0F Digital Distance Sensor 10cm
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack
0.100" (2.54 mm) Female Header: 1x3-Pin, Straight

Related Categories

Pololu Digital Distance Sensors
Proximity Sensors and Range Finders
Carriers for ST Time-of-Flight (ToF) Distance Sensors
Sharp Distance Sensors
Sonar Range Finders
Pololu QTR Reflectance Sensors
Sensors
Development Boards (Programmable Controllers)
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Nuts and Screws
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors