Electronics » Motion Control Modules » Brushed DC Motor Drivers »
DRV8256E Single Brushed DC Motor Driver Carrier
This compact breakout board for TI’s DRV8256E motor driver offers a wide operating voltage range of 4.5 V to 48 V and can deliver a continuous 1.9 A (6.4 A peak for <1 second) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
| Description | Specs (15) | Pictures (9) | Resources (5) | FAQs (0) | On the blog (1) | Distributors (9) |
|---|
Dimensions
| Size: | 0.6″ × 0.6″ |
|---|---|
| Weight: | 0.6 g1 |
General specifications
| Motor driver: | DRV8256E |
|---|---|
| Motor channels: | 1 |
| Minimum operating voltage: | 4.5 V |
| Maximum operating voltage: | 48 V2 |
| Continuous output current per channel: | 1.9 A |
| Peak output current per channel: | 6.4 A |
| Maximum PWM frequency: | 100 kHz |
| Minimum logic voltage: | 1.8 V |
| Maximum logic voltage: | 5.5 V |
| Reverse voltage protection?: | Y3 |
| Header pins soldered?: | N |
Identifying markings
| PCB dev codes: | md42a |
|---|---|
| Other PCB markings: | 0J13491 |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
