A-Star 32U4 Prime LV (SMT Components Only)

Pololu item #: 4005
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 24.95
5 22.95
25 21.12
100 19.43


backorders allowed

The A-Star 32U4 Prime LV is a programmable board based on the ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2 V to 16 V (though it requires at least 3 V at start-up). This configuration of the A-Star 32U4 Prime LV has no microSD support and does not include any through-hole components; it is intended for those who want to customize the way it is assembled.

Alternatives available with variations in these parameter(s): version Select variant…

 Description Specs (17) Pictures (9) Resources (25) FAQs (0) On the blog (1) Distributors (0) 

Dimensions

Size: 2.8″ × 2.1″ (common Arduino form factor)
Weight: 13 g

General specifications

Processor: ATmega32U4 @ 16 MHz
RAM size: 2560 bytes
Program memory size: 32 Kbytes1
Motor channels: 0
User I/O lines: 26
Input voltage range: 2 V to 16 V (LV)
Minimum operating voltage: 2 V2
Maximum operating voltage: 16 V
Maximum output current: 1.8 A3
Logic voltage: 5 V
Reverse voltage protection?: Y
External programmer required?: N
Version: includes no microSD support and no through-hole components

Identifying markings

PCB dev codes: ac03e
Other PCB markings: 0J11918

Notes:

1
Note that 4 KB of the MCU's 32 KB of flash memory is used by the pre-installed USB bootloader. All 32 KB is available when programming via the ISP header rather than the bootloader.
2
Note: the minimum startup voltage is 3 V, but the regulator can operate down to 2 V after startup.
3
Available current depends on input voltage, current consumed by the board, ambient conditions, and regulator topology. See product documentation and performance graphs for details.

Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
Wall Power Adapter: 5VDC, 1A, 5.5×2.1mm Barrel Jack, Center-Positive
A-Star Prime Accessory Pack
Stackable 0.100" Female Header Set for Arduino Shields
A-Star 32U4 Prime LV microSD with LCD
8×2 Character LCD - Black Bezel (Parallel Interface)
A-Star 32U4 Prime LV microSD (SMT Components Only)
A-Star 32U4 Prime SV microSD with LCD
A-Star 32U4 Prime LV microSD
A-Star 32U4 Prime SV microSD (SMT Components Only)
A-Star 32U4 Mini LV
A-Star 32U4 Micro
A-Star 32U4 Prime SV microSD
A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT Components Only)
Pololu USB AVR Programmer v2.1
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
TPS2113A Power Multiplexer Carrier with USB Micro-B Connector
5V Step-Up/Step-Down Voltage Regulator S9V11F5
Breakout Board for microSD Card with 3.3V Regulator and Level Shifters
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu DRV8835 Dual Motor Driver Shield for Arduino
Zumo 32U4 OLED Robot Kit (No Motors)
Zumo Robot for Arduino (Assembled with 75:1 HP Motors)

Related Categories

A-Star 32U4 Prime
A-Star Programmable Controllers
Shields for Arduino
Zumo 32U4 OLED Robot
Development Boards (Programmable Controllers)
Displays
Signal Adapters and Extenders
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Voltage Regulators and Power Supplies
LEDs
Switches, Buttons, and Relays
Nuts and Screws
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors