Wires with pre-crimped terminals family overview
These premium stranded copper wires are great for making quick and easy prototyping connections. Each end is pre-crimped with a male or female crimp pin, and they can be combined with our crimp connector housings to create custom cables with 0.1″ (2.54 mm) connectors. Just pick colors and genders for your wires and snap them into the housings of your choice (note: getting the wires out is possible but not as easy). No soldering is required!
These cables give you the flexibility to make harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (the left picture below shows an example of this). You can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy, as shown in the right picture below.
|
 | Micro Metal Geamotor with a custom cable made from wires with pre-crimped terminals. |
|---|
|
A variety of lengths and colors are available:
|
| length |
single-color packs |
multi-color option |
gauge (AWG) |
| 1″ (2.5 cm) |
10-pack, 6 colors available |
60-pack (10 each of 6 colors) |
26 |
| 2″ (5 cm) |
10-pack, 6 colors available |
60-pack (10 each of 6 colors) |
26 |
| 3″ (7.5 cm) |
10-pack, 6 colors available |
10-wire, 10-color ribbon cable |
26 |
| 6″ (15 cm) |
10-pack, 10 colors available |
10-wire, 10-color ribbon cable |
26 |
| 12″ (30 cm) |
10-pack, 10 colors available |
10-wire, 10-color ribbon cable |
26 |
| 24″ (60 cm) |
5-pack, 10 colors available |
10-wire, 10-color ribbon cable |
26 |
| 36″ (90 cm) |
5-pack, 6 colors available |
10-wire, 10-color ribbon cable |
22 |
| 60″ (150 cm) |
2-pack, 6 colors available |
10-wire, 10-color ribbon cable |
22 |
|
 | Pololu Ribbon Cables with Pre-Crimped Terminals are available in a variety of lengths (3″, 6″, 12″, and 24″ shown; 36″ and 60″ not pictured). |
|---|
|
 | Ribbon Cable with Pre-Crimped Terminals is easy to peel apart (6″ M-F version shown). |
|---|
|
These wires are available with male crimp pins on both ends, female crimp pins on both ends, or one male and one female crimp pin. These crimped terminals are designed for use with 0.1″ (2.54 mm) male headers and female headers, solderless breadboards, and prototyping PCBs. Close-up pictures of the male and female crimp pins are shown below:
 | Ribbon Cable with Pre-Crimped Terminals male end. |
|---|
|
 | Ribbon Cable with Pre-Crimped Terminals female end. |
|---|
|
Note: The male crimp pins and female crimp pins are also available by themselves for those who want to crimp their own wires with different lengths or gauges.
You can use the following selection boxes to get to the specific wires you are looking for:
Alternatives available with variations in these parameter(s):
gender length color
Select variant…
Premium jumper wires
We also have these wires available with 1×1 housings already installed over the crimp pins, as shown in the two pictures above. For more information, see our Premium Jumper Wires, or use the following selection boxes:
Alternatives available with variations in these parameter(s):
gender length color
Select variant…
The following video talks about some of our various wire and cable options and includes a short demonstration of how to use these pre-crimped wires with our crimp connector housings:
One of our customers has made a nice video that talks about how to make custom cables with these pre-crimped wires and with self-crimped wires made with our crimping tool. The section on using pre-crimped wires and crimp connector housings starts at around 2:00.
People often buy this product together with:
Compare all products in Male-Male Wires with Pre-Crimped Terminals.
