Raspberry Pi » Raspberry Pi Expansion Boards » Pololu Dual G2 High-Power Motor Drivers for Raspberry Pi »
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 V operating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The default pin mappings make it easy to get started, but they can be customized for more specialized applications. This version ships fully assembled with connectors soldered in.
Compare all products in Pololu Dual G2 High-Power Motor Drivers for Raspberry Pi or Pololu High-Power Motor Drivers.
| Description | Specs (11) | Pictures (8) | Resources (7) | FAQs (0) | On the blog (1) |
|---|
Dimensions
| Size: | 65 mm × 56 mm |
|---|---|
| Weight: | 30 g1 |
General specifications
| Motor channels: | 2 |
|---|---|
| Minimum operating voltage: | 6.5 V |
| Maximum operating voltage: | 36 V2 |
| Continuous output current per channel: | 14 A3 |
| Maximum PWM frequency: | 100 kHz |
| Reverse voltage protection?: | Y |
| Partial kit?: | N |
Identifying markings
| PCB dev codes: | rpe03b |
|---|---|
| Other PCB markings: | 0J10614, blank white box |
Notes:
- 1
- Without included mounting hardware.
- 2
- Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 30 V, which leaves a safety margin for ripple voltage on the supply line. Disconnecting on-board regulator increases absolute maximum to 40 V. Not recommended for use with 36 V batteries.
- 3
- Typical results at room temperature with both channels running at 90% duty cycle.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
