Electronics » Motion Control Modules » Stepper Motor Drivers »
Pololu High-Power Stepper Motor Driver 36v8
This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can deliver up to 8 A continuous per phase without a heat sink or forced air flow (11 A max with sufficient additional cooling). The SPI interface allows configuration of the current limiting, step mode (9 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also provides back-EMF feedback that can be used for more advanced control and stall detection algorithms. Additional features include reverse-voltage, under-voltage, and over-current protection.
| Description | Specs (14) | Pictures (14) | Resources (7) | FAQs (3) | On the blog (1) | Distributors (6) |
|---|
|
Pololu High-Power Stepper Motor Driver 36v8. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8 with included headers, shorting block, and terminal blocks. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8, bottom view. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8, bottom view with dimensions. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8 pinout. |
|---|
 |
Surface mount jumper for V5 and IOREF pins on the Pololu High-Power Stepper Motor Driver 36v8. |
|---|
 |
Typical wiring diagram for connecting a microcontroller to a Pololu High-Power Stepper Motor Driver 36v8. |
|---|
 |
Typical wiring diagram for connecting a 5 V microcontroller to a Pololu High-Power Stepper Motor Driver 36v8 |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8, top view. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8, bottom view. |
|---|
 |
Schematic diagram of the Pololu High-Power Stepper Motor Driver 36v8. |
|---|
 |
Pololu High-Power Stepper Motor Driver 36v8 with included headers and terminal blocks soldered and shorting block installed. |
|---|
 |
Pololu High-Power Stepper Motor Driver with large stepper motor (36v4 version pictured). |
|---|
 |
Controlling a Pololu High-Power Stepper Motor Driver with an Arduino-compatible #3104 A-Star 32U4 Mini SV (36v4 version pictured). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
