Electronics » Development Boards (Programmable Controllers) » P-Star Programmable Controllers »
P-Star 45K50 Mini SV
The P-Star 45K50 Mini SV is a small programmable module featuring Microchip’s PIC18F45K50 microcontroller. It packs a Micro-USB interface and 30 digital input/output pins onto a board measuring 2″ × 0.7″ and ships preloaded with a USB bootloader, so no external programmer is required.
| Description | Specs (13) | Pictures (8) | Resources (21) | FAQs (0) | On the blog (1) | Distributors (36) |
|---|
Dimensions
| Size: | 0.7″ × 2.05″ × 0.17″1 |
|---|---|
| Weight: | 3.5 g2 |
General specifications
| Processor: | PIC18F45K50 |
|---|---|
| RAM size: | 2 Kbytes |
| Program memory size: | 32 Kbytes3 |
| Motor channels: | 0 |
| User I/O lines: | 304 |
| Minimum operating voltage: | 5 V5 |
| Maximum operating voltage: | 36 V |
| Logic voltage: | 5 V |
| Reverse voltage protection?: | Y6 |
| External programmer required?: | N |
Identifying markings
| PCB dev codes: | pc02c |
|---|
Notes:
- 1
- Without included optional headers. This measurement includes the USB Micro-B connector, which extends 0.05″ past the edge of the PCB.
- 2
- Without included optional headers.
- 3
- 8 KB of the MCU's 32 KB of flash memory is used by the pre-installed USB bootloader. All 32 KB is available if you use an external programmer and erase the bootloader.
- 4
- All 30 can be used as digital I/O, 25 can be used as analog inputs, and one can be an analog output. 28 of the 30 are available along the sides for use in a breadboard.
- 5
- For light loads. The regulator's dropout voltage increases approximately linearly with the load, from a few millivolts at no load up to around 0.6 V at 500 mA.
- 6
- On BAT+.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
