Electronics » Motion Control Modules » Tic Stepper Motor Controllers »
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a discrete MOSFET stepper motor driver, and male headers and terminal blocks are included but not soldered. It can operate from 8 V to 50 V and can deliver up to approximately 4 A per phase without a heat sink or forced air flow (or 6 A max with sufficient additional cooling).
Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…
Description | Specs (15) | Pictures (10) | Resources (16) | FAQs (1) | On the blog (1) |
---|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (without connectors soldered) with included headers and terminal blocks. |
---|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered). |
---|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller, bottom view with dimensions. |
---|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (top view). |
---|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (bottom view). |
---|
Basic pinout diagram of the Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller. |
---|
Tic T500, T834, T825, T249, and 36v4 USB Multi-Interface Stepper Motor Controllers. |
---|
The Status tab of the Pololu Tic Control Center. |
---|
The Input and Motor Settings tab of the Pololu Tic Control Center. |
---|
Standard packaging for the Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller. |
---|