Electronics » Motion Control Modules » Tic Stepper Motor Controllers »
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a discrete MOSFET stepper motor driver, and it ships with soldered header pins and terminal blocks. It can operate from 8 V to 50 V and can deliver up to approximately 4 A per phase without a heat sink or forced air flow (or 6 A max with sufficient additional cooling).
Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…
| Description | Specs (15) | Pictures (9) | Resources (16) | FAQs (1) | On the blog (1) |
|---|
|
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered). |
|---|
 |
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller, bottom view with dimensions. |
|---|
 |
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (top view). |
|---|
 |
Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (bottom view). |
|---|
 |
Basic pinout diagram of the Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller. |
|---|
 |
Tic T500, T834, T825, T249, and 36v4 USB Multi-Interface Stepper Motor Controllers. |
|---|
 |
The Status tab of the Pololu Tic Control Center. |
|---|
 |
The Input and Motor Settings tab of the Pololu Tic Control Center. |
|---|
 |
Standard packaging for the Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
