Electronics » Motion Control Modules » Tic Stepper Motor Controllers »
Tic T500 USB Multi-Interface Stepper Motor Controller
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver, and male headers and terminal blocks are included but not soldered. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).
Alternatives available with variations in these parameter(s): model connectors soldered? Select variant…
| Description | Specs (15) | Pictures (10) | Resources (16) | FAQs (1) | On the blog (7) | Distributors (45) |
|---|
|
Tic T500 USB Multi-Interface Stepper Motor Controller (without connectors soldered) with included headers and terminal blocks. |
|---|
 |
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered). |
|---|
 |
Tic T500 USB Multi-Interface Stepper Motor Controller, bottom view with dimensions. |
|---|
 |
Tic T500 USB Multi-Interface Stepper Motor Controller (top view). |
|---|
 |
Tic T500 USB Multi-Interface Stepper Motor Controller (bottom view). |
|---|
 |
Basic pinout diagram of the Tic T500 USB Multi-Interface Stepper Motor Controller. |
|---|
 |
Connecting a bipolar stepper motor to the Tic T500. |
|---|
 |
Tic T500, T834, T825, and T249 USB Multi-Interface Stepper Motor Controllers. |
|---|
 |
The Status tab of the Pololu Tic Control Center. |
|---|
 |
The Input and Motor Settings tab of the Pololu Tic Control Center. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
