Electronics » Motion Control Modules » Stepper Motor Drivers »
TB67S128FTG Stepper Motor Driver Carrier
This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and microstepping down to 1/128-step. In addition, it has the ability to dynamically select an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power consumption and heat generation. The driver has a wide operating voltage range of 6.5 V to 44 V and can deliver approximately 2.1 A per phase continuously without a heat sink or forced air flow (up to 5 A peak). It features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).
Description | Specs (15) | Pictures (10) | Resources (10) | FAQs (4) | On the blog (1) |
---|
TB67S128FTG Stepper Motor Driver Carrier. |
---|
TB67S128FTG Stepper Motor Driver Carrier (top view). |
---|
TB67S128FTG Stepper Motor Driver Carrier, bottom view with dimensions. |
---|
TB67S128FTG Stepper Motor Driver Carrier with included headers and terminal blocks. |
---|
TB67S128FTG Stepper Motor Driver Carrier with included headers and terminal blocks soldered. |
---|
TB67S128FTG Stepper Motor Driver Carrier, top view with labeled pinout. |
---|
Minimal wiring diagram for connecting a microcontroller to a TB67S128FTG stepper motor driver carrier. |
---|
TB67S128FTG Stepper Motor Driver Carrier, Active Gain Control configurable logic input pin surface mount jumpers. |
---|
Schematic diagram of the TB67S128FTG Stepper Motor Driver Carrier. |
---|
Standard packaging for the TB67S128FTG Stepper Motor Driver Carrier. |
---|