Electronics » Motion Control Modules » Brushed DC Motor Drivers »
DRV8838 Single Brushed DC Motor Driver Carrier
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
| Description | Specs (14) | Pictures (8) | Resources (6) | FAQs (0) | On the blog (5) |
|---|
Dimensions
| Size: | 0.4″ × 0.5″1 |
|---|---|
| Weight: | 0.3 g1 |
General specifications
| Motor driver: | DRV8838 |
|---|---|
| Motor channels: | 1 |
| Minimum operating voltage: | 0 V |
| Maximum operating voltage: | 11 V |
| Continuous output current per channel: | 1.7 A2 |
| Peak output current per channel: | 1.8 A |
| Maximum PWM frequency: | 250 kHz |
| Minimum logic voltage: | 1.8 V |
| Maximum logic voltage: | 7 V |
| Reverse voltage protection?: | Y |
Identifying markings
| PCB dev codes: | md26a |
|---|---|
| Other PCB markings: | 0J8465 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
