Electronics » Motion Control Modules » Brushed DC Motor Drivers »
MAX14870 Single Brushed DC Motor Driver Carrier
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
| Description | Specs (12) | Pictures (9) | Resources (6) | FAQs (0) | On the blog (2) | Distributors (54) |
|---|
|
MAX14870 Single Brushed DC Motor Driver Carrier. |
|---|
 |
MAX14870 Single Brushed DC Motor Driver Carrier with included hardware. |
|---|
 |
Two MAX14870 Single Brushed DC Motor Driver Carriers plugged into a breadboard. |
|---|
 |
MAX14870 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. |
|---|
 |
MAX14870 Single Brushed DC Motor Driver Carrier, labeled top view. |
|---|
 |
Minimal wiring diagram for connecting a microcontroller to a MAX14870 Single Brushed DC Motor Driver Carrier. |
|---|
 |
MAX14870 single brushed DC motor driver carrier schematic diagram. |
|---|
 |
Step one of enabling current limiting on the MAX14870 Single Brushed DC Motor Driver Carrier: cut trace between 1206 resistor pads. |
|---|
 |
Step two of enabling current limiting on the MAX14870 Single Brushed DC Motor Driver Carrier: add an appropriate 1206 RSENSE resistor. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
