Regulators and Power Supplies » Step-Down (Buck) Voltage Regulators » D24V22Fx Step-Down Voltage Regulators »
Pololu 9V, 2.3A Step-Down Voltage Regulator D24V22F9
Output voltage | Typical max current output1 | Input voltage range2 |
---|---|---|
9 V | 2.3 A | 9.6 V – 36 V |
1 Typical continuous output current at 24 V in. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the product pages for more information.
2 Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in D24V22Fx Step-Down Voltage Regulators.
Description | Specs (10) | Pictures (8) | Resources (3) | FAQs (0) | On the blog (1) |
---|
Dimensions
Size: | 0.7″ × 0.7″ × 0.31″1 |
---|---|
Weight: | 2.3 g1 |
General specifications
Minimum operating voltage: | 9.6 V2 |
---|---|
Maximum operating voltage: | 36 V |
Continuous output current: | 2 A3 |
Output voltage: | 9 V |
Reverse voltage protection?: | Y |
Maximum quiescent current: | 4 mA4 |
Identifying markings
PCB dev codes: | reg19a |
---|---|
Other PCB markings: | 0J9251 |
Notes:
- 1
- Without included optional headers.
- 2
- For small loads; this voltage rises approximately linearly up to around 10 V at 2.3 A output.
- 3
- Typical continuous output current at 24 V in. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.
- 4
- Typical worst case; quiescent current is typically around 1 mA for most of the operating range. The ENABLE pin can be used to reduce the quiescent current to less than 10 μA per volt on VIN.