Adafruit CC3000 Wi-Fi Breakout Board with Onboard Ceramic Antenna

Pololu item #: 2774
Brand: Adafruit

This product has been discontinued.

This breakout board from Adafruit features TI’s CC3000 Wi-Fi module on a compact, breadboard-compatible PCB with an onboard ceramic antenna. The CC3000 uses SPI for communication instead of UART, so the communication speed is not limited to a fixed baud rate. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP, and AES, and a built-in TCP/IP stack with a BSD socket interface supports TCP and UDP in client and server mode with up to 4 concurrent socket connections. An Arduino library and example sketches make it easy to get started.

 Description Specs (2) Pictures (4) Resources (6) FAQs (0) On the blog (1) Distributors (0) 

CC3000 introduction

Overview

Adafruit CC3000 Wi-Fi breakout board, bottom view with quarter for size reference.

The Adafruit CC3000 WiFi breakout board (v1.1) is based on the CC3000 Wi-Fi module from TI. The onboard ceramic antenna, breadboard-compatible design, and the Adafruit CC3000 Arduino library (compatible with Arduino Micro, Leonardo, Uno, and Mega as well as our Arduino-compatible A-Star controllers) allow for easy integration into embedded projects. The CC3000 uses SPI for communication instead of UART, so the communication speed is not limited to a fixed baud rate. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP, and AES. A built-in TCP/IP stack with a BSD socket interface supports TCP and UDP in client and server mode with up to 4 concurrent socket connections. The board also has a tri-state buffer on the MISO pin to allow the use of the CC3000 with other SPI devices on the same bus. We carry the Adafruit CC3000 Wi-Fi shield for Arduino with onboard ceramic antenna.

Note: The CC3000 does not support “AP” mode; it can connect to an access point, but it cannot be an access point.

For documentation and resources to help you use the CC3000 Wi-Fi breakout board, including tutorials, see the guide on Adafruit’s site.

Features

  • Features CC3000 Wi-Fi module from TI
  • Uses SPI for communication
  • Integrated 3.3 V regulator
  • Integrated level shifter
  • Tri-state buffer on the MISO pin
  • Comprehensive Adafruit CC3000 Wi-Fi guide
  • Adafruit CC3000 Arduino library with examples to help get you started quickly
  • Onboard ceramic antenna
  • Two mounting holes
  • Compact with 0.1″-pitch holes that are compatible with standard solderless breadboards and perfboards

Included hardware

The board ships with all of its surface-mount parts populated. However, soldering is required for assembly of the included 0.1″ male headers.

Adafruit CC3000 Wi-Fi breakout board, top view with included hardware.

Schematic diagram

Note: This product is Adafruit product ID 1469.

People often buy this product together with:

A-Star 32U4 Micro A-Star 32U4 Micro

Related Products

A-Star 32U4 Micro
A-Star 32U4 Mini LV
Wixel Programmable USB Wireless Module (Fully Assembled)
Premium Jumper Wire 50-Piece 10-Color Assortment M-M 6"
Premium Jumper Wire 50-Piece 10-Color Assortment M-F 6"

Related Categories

Wireless
Arduino-Compatible
A-Star Programmable Controllers
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors