Electronics » Sensors » Accelerometers, Gyros, & Compasses »
LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces. This LSM6DS33 carrier board includes a 3.3 V voltage regulator and integrated level shifters that allow operation from 2.5 to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Compare all products in Accelerometers, Gyros, & Compasses or MEMS Sensors.
| Description | Specs (9) | Pictures (6) | Resources (8) | FAQs (0) | On the blog (3) |
|---|
File downloads
-
LSM6DS33 datasheet (1MB pdf)
Datasheet for the ST LSM6DS33 3D accelerometer and 3D gyroscope.
-
AN4682: LSM6DS33 application note (1MB pdf)
This application note from ST provides usage information and application hints for the LSM6DS33 accelerometer and gyro.
-
UM10204 I²C-bus specification and user manual (1MB pdf)
The official specification for the I²C-bus, which is maintained by NXP.
-
LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator schematic diagram (89k pdf)
Printable schematic diagram of the LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator.
-
Dimension diagram of the LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator (371k pdf)
-
Drill guide for the LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator (20k dxf)
This DXF drawing shows the locations of all of the board’s holes.
-
3D model of the LSM6DS33 3D Accelerometer and Gyro Carrier with Voltage Regulator (3MB step)
Recommended links
-
LSM6 library for Arduino
An Arduino library for interfacing with the LSM6DSO and LSM6DS33 accelerometer and gyro ICs.
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
