Hardware » Motor Shaft Adapters » Pololu Aluminum Scooter Wheel Adapters »
Pololu Aluminum Scooter Wheel Adapter for 1/4″ Shaft
This two-part aluminum assembly mounts directly to 1/4 inch diameter motor output shafts like those on our NEMA 23 stepper motors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings. Two M4 set screws are included for securing the threaded adapter piece to a motor shaft, and three 14 mm M3 screws are included for clamping the wheel between the threaded adapter piece and the washer.
Alternatives available with variations in these parameter(s): shaft diameter Select variant…
Compare all products in Pololu Aluminum Scooter Wheel Adapters.
| Description | Specs (2) | Pictures (8) | Resources (2) | FAQs (0) | On the blog (1) | Distributors (27) |
|---|
|
1/4 inch scooter wheel adapter with included hardware. |
|---|
 |
1/4 inch scooter wheel adapter pieces assembled with the included hardware. |
|---|
 |
The machined piece of the 6 mm scooter wheel adapter mounted to the output shaft of a 37D mm gearmotor. |
|---|
 |
A 37D mm gearmotor connected to a scooter wheel by the 6 mm scooter wheel adapter. |
|---|
 |
1/4 inch scooter wheel adapter pieces assembled with the included hardware. |
|---|
 |
The machined piece of the 6 mm scooter wheel adapter mounted to the output shaft of a 37D mm gearmotor. |
|---|
 |
A 37D mm gearmotor connected to a scooter wheel by the 6 mm scooter wheel adapter. |
|---|
 |
Exploded view of the scooter wheel adapter assembly with a gearmotor and scooter wheel. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
