Electronics » Computer Interface »
TPS2113A Power Multiplexer Carrier with USB Micro-B Connector
This breakout board for Texas Instruments’s TPS2113A autoswitching power multiplexer allows you to select which of two power sources is connected to a load while blocking reverse current into either of the sources. It has an adjustable current limit that can be set as high as 2 A and an adjustable switching threshold. Each input power rail on the multiplexer can be supplied with 2.8 V to 5.5 V, and the board also breaks out a USB Micro-B connector that can be used to supply one of the rails.
Compare all products in Computer Interface or Electronics Prototyping or Switches, Buttons, and Relays.
| Description | Specs (7) | Pictures (9) | Resources (2) | FAQs (0) | On the blog (1) | Distributors (25) |
|---|
|
TPS2113A power multiplexer carrier with USB Micro-B connector. |
|---|
 |
TPS2113A power multiplexer carrier with USB Micro-B connector, bottom view with dimensions. |
|---|
 |
TPS2113A power multiplexer carrier with USB Micro-B connector with included optional header pins. |
|---|
 |
TPS2113A power multiplexer carrier with USB Micro-B connector in a breadboard. |
|---|
 |
TPS2113A power multiplexer carrier with USB Micro-B connector pinout. |
|---|
 |
Typical connection diagram for using the TPS2113A power multiplexer carrier without USB. |
|---|
 |
Typical connection diagram for using the TPS2113A power multiplexer carrier with USB as the preferred supply when VSNS is high. |
|---|
 |
Typical connection diagram for using the TPS2113A power multiplexer carrier with USB as the non-preferred supply when VSNS is high. |
|---|
 |
TPS2113A power multiplexer carrier with USB Micro-B connector schematic diagram. |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
