Electronics » Voltage Regulators and Power Supplies » Step-Up (Boost) Voltage Regulators »
Pololu 5V Step-Up Voltage Regulator U1V10F5
This tiny (0.35″×0.45″) U1V10F5 switching step-up (or boost) voltage regulator efficiently generates 5 V from input voltages as low as 0.5 V. Unlike most boost regulators, the U1V10F5 automatically switches to a linear down-regulation mode when the input voltage exceeds the output. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
Alternatives available with variations in these parameter(s): output voltage Select variant…
| Description | Specs (10) | Pictures (5) | Resources (5) | FAQs (0) | On the blog (0) |
|---|
Dimensions
| Size: | 0.35″ × 0.45″ × 0.1″1 |
|---|---|
| Weight: | 0.4 g1 |
General specifications
| Minimum operating voltage: | 0.5 V |
|---|---|
| Maximum operating voltage: | 5.5 V |
| Maximum input current: | 1.2 A2 |
| Output voltage: | 5 V |
| Reverse voltage protection?: | N |
| Maximum quiescent current: | 1 mA3 |
Identifying markings
| PCB dev codes: | reg12b |
|---|---|
| Other PCB markings: | 0J7517 |
Notes:
- 1
- Without included optional headers.
- 2
- Regulator may overheat at lower input currents when VIN is much lower than VOUT. Available output current is a function of VIN, VOUT, and the regulator efficiency.
- 3
- The highest quiescent currents occur at very low input voltages; for most of the input voltage range, the quiescent current is well below 1 mA.
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
