AltIMU-10 v4 Gyro, Accelerometer, Compass, and Altimeter (L3GD20H, LSM303D, and LPS25H Carrier)
The Pololu AltIMU-10 v4 is an inertial measurement unit (IMU) and altimeter that features the same L3GD20H gyro and LSM303D accelerometer and magnetometer as the MinIMU-9 v3, and adds an LPS25H digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.
Clearance: This board is being replaced by the newer AltIMU-10 v5.
| Description | Specs (8) | Pictures (8) | Resources (18) | FAQs (1) | On the blog (4) |
|---|
-
New-ish product roundup: 24 more QTR arrays, MP6500 carriers with soldered headers, and a pressure sensor
- 20 September 2018We’ve been hard at work over the past week putting up lots of new (but perhaps familiar-seeming) products. Here’s a quick recap: 24 new QTR...
-
New products: MinIMU-9 and AltIMU-10 v5 IMU boards
- 4 February 2016We have released new versions of our MinIMU-9 and AltIMU-10 inertial measurement unit (IMU) modules, which use an I²C interface to provide nine...
-
Firetail UAV System
- 25 July 2014We mentioned it in passing in an earlier post, but we think that the Firetail UAV System deserves its own post. Since then, Firetail’s creator,...
-
New product: AltIMU-10 v4 gyro, accelerometer, compass, and altimeter
- 27 June 2014Two weeks ago, we announced a big price reduction of our MEMS-based sensors and explained a little about why we release new versions of these boards...
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
