Pololu Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors

This lightweight (about 7.5 g) but strong bracket is made from 2mm-thick black anodized aluminum and is specifically designed to work with the typical faceplate mounting holes of NEMA 14 stepper motors. The slots through which the motor mounts to the bracket allow for 2 mm of play for fine-tuning position, and four 5 mm M3 screws are included for securing the motor to the bracket. These M3 screws work with all of the NEMA 14 stepper motors we carry (items #1207, #1208, and #1209); different screws might be required when using this bracket with stepper motors from other suppliers. The other side of the bracket includes a variety of slots and holes that can be used with #4 and M3 screws.

Dimension diagram of the Pololu stamped aluminum L-bracket for NEMA 14 stepper motors. Units are mm over [inches].

This drawing is also available as a downloadable PDF (85k pdf).

People often buy this product together with:

Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack)

Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase

Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase